Now the induction door has been seen everywhere in life, can always give a person a feeling of science and fashion, so ji 'nan induction door slow response and door motionless how to do? This is also a common problem when using sensor gates.

　　濟南感應門反應遲緩問題：

　　1、感應門反應遲緩有很多原因，可能是感應探頭的探測范圍太小，或是探頭內部有積塵現象，導致感應門反應太慢。

　　2、也有可能是門體太重，超出了主機的電機牽引力。

　　Ji 'nan induction gate slow response problem:

　　there are many reasons for the slow response of the induction gate. It may be that the detection range of the induction probe is too small, or there is dust accumulation inside the probe, leading to the slow response of the induction gate.

　　it is also possible that the door body is too heavy, beyond the motor traction of the host.

　　濟南感應門門扇不動問題：

　　Ji 'nan induction door door fan motionless problem:

　　1、感應門門扇不動是很常見的問題，你可以檢查下感應門是否有電，如果感應門斷電的話門扇就不動，直接接上就可以了。

　　induction door door fan motionless is a very common problem, first of all, you can check whether the induction door has electricity, if the induction door power off the door fan will not move, directly connected to it.

　　2、其次，仔細看看感應門是否有拖地現象，如果有這種現象，門在起動時會很吃力，而感應門的主控制器會因為阻礙物而自鎖保護，使門扇停止運動。

　　secondly, take a close look at the induction door whether there is a dragging phenomenon, if there is this phenomenon, the door will be very difficult to start, and the main controller of the induction door will be self-locking protection because of obstruction, so that the door fan stops moving.

　　3、也可以檢查下感應感應門是否安裝了"光線",因為光線的受光器上有灰塵覆蓋也會引起誤動作,使感應門主控制誤認為有物體在門扇中間,從而停止開關門。

　　you can also check whether the induction induction door is installed with the "safety light ", because the safety light is covered by dust on the light device will also cause the wrong action, so that the main control of the induction door is mistaken for objects in the middle of the door, so as to stop opening and closing.

　　濟南感應門開關聲音很大問題：

　　Ji 'nan induction door switch sound is very big problem:

　　1、門扇吊具的走輪因長時間的運行會有一定的磨損，這也會影響感應門的使用，如果出現的只是輕微磨損，可以對軌道和走輪進行一次清洗，也可以給走輪的軸承加一點潤滑油，就可以恢復感應門的使用了。

　　The running wheel of the door fan spanner will have certain wear due to long time operation, which will also affect the use of the induction door. If there is only slight wear, the track and the running wheel can be cleaned once, and the bearing of the walking wheel can also be added with a little lubricating oil, so that the use of the induction door can be restored.

　　2、有時候感應門部分金屬連接件也會有松動現象，只需重新加固即可。

　　sometimes part of the metal connector of the induction door will also have loose phenomenon, only need to re-reinforce.

　　濟南感應門反應遲緩及門扇不動怎么辦？以上我們講解了相關的內容，希望能夠幫助到您。另外要注意，并不是感應門不需要保養壞了修就可以了，感應門的售后維修也很重要。相關內容的了解您可以來http://m.taomeishi.com.cn這里。

　　Ji 'nan induction door slow response and door fan motionless how to do? Above we explained the relevant content, hope to help you. In addition, we should note that it is not the induction door that does not need maintenance to repair it, and the after-sales maintenance of the induction door is also very important. You can go to http://m.taomeishi.com.cn.